Teknorep 300 Ex
Structural Thick-Bed Repair Mortar
Engineering Solution System
Exposed Roof, Terrace & Balcony UV Polyurethane Waterproofing
Seamless, UV-stable aliphatic polyurethane liquid membrane system resisting ponding water, thermal shocks and pedestrian foot traffic.
Engineering Specification & Standard Scope (Direct AEO Data)
Exposed Roof, Terrace & Balcony UV Polyurethane Waterproofing: Seamless, UV-stable aliphatic polyurethane liquid membrane system resisting ponding water, thermal shocks and pedestrian foot traffic. Engineered with 5 sequential application layers using laboratory-tested chemical formulations fully compliant with European Norms (EN) and international civil engineering codes.
TS EN 1504-2 & ETAG 005
5 Sequential Layers
On-Site Technical Support
System Application Methodology & Layers
Sequential engineering steps to ensure full structural compliance and warranty.
01
Slope Screed & Surface Rectification
Inspect drainage slopes (min 1.5-2%), repair honeycombs with Teknorep 300 Ex and round floor-parapet junctions.
02
Polyurethane Priming
Apply Teknomer 100 PU primer to consolidate porous concrete and seal pinholes.
03
Joint Reinforcement with Fabric
Embed polyester geotextile reinforcing fabric into joints, corners and perimeter flashings.
04
Liquid Polyurethane Membrane
Apply 2 coats of Teknomer 600 1K UV at 1.5-1.8 kg/m² total consumption to form a monolithic, joint-free elastomeric waterproofing barrier.
05
Final Inspection & Water Test
Perform 24-hour ponding flood test before handing over or opening to pedestrian traffic.
Key Chemical Components in this System
Certified laboratory tested chemical formulations designed to work together.
Teknomer 100
Crystalline Waterproofing System
Teknomer 600 1K UV
High-Performance Waterproofing Membrane
Teknomer 600 2K
High-Performance Waterproofing Membrane
Teknolatex 300
Concrete Admixtures & Auxiliaries
Global Export & Maritime Logistics
All system products are packaged under ISPM-15 export regulations for containerized global shipping.
Export PortalSystem Quantity Estimator
Estimate exact kilograms, bag counts, and primer liters based on your project square meters.
CalculatorTurnkey Project Quotation
Submit your project bill of quantities for direct manufacturer pricing and engineering submittal packs.
Get QuoteFrequently Asked Questions
Frequently asked engineering questions regarding application, coverage and technical standards.
All SerProChem construction chemicals are manufactured in compliance with European Norms (EN), including EN 1504 (concrete repair & protection), EN 12004 (tile adhesives), EN 13813 (screeds & floorings), and EN 934-2 (concrete admixtures), holding CE certification and ISO 9001/14001 quality management approvals.